Display Shelf | CC09

Usually ships within one to two business days

String Swing sliding display shelves will safely display any accessories on 3”, 4” or 6” slatwall panels. Also available in flat wall installation. This display shelf is 8”x12” and slides out to become 14”x12”. The shelf is sloped at a gentle 20 degrees allowing a clear view of items displayed while maintaining balance. The CCJL Cable Jack Lock can be used with this shelf to secure drum machines, mixers, 4 tracks and more.

  • Made in the USA with a structural lifetime warranty
  • Mounting Hardware Included (Flat wall installation)

Installation Instructions:

Flat Wall: Choose location for hanger.  Drive screws through mounting holes of hanger into wall using a phillips screwdriver.  If a wall stud is not found, these pilot holes are necessary for installing the plastic toggles.  To do this, use the screwdriver to push and turn the toggle clockwise until flush.  Remount hanger with screw into toggles.  DO NOT REUSE TOGGLES.

Slatwall: Hook the clip into your slatwall system, just to the left of the hanger.  Then, gently pull the lip open on the right edge of the clip, and slide it over the hanger plate. Make sure that the lip has locked in place securely around the right edge of the plate. (This clip allows for movement of the plate, without allowing it to lift off your slatwall when the instrument is removed.)

Lifetime Warranty