Front Facing Hanger -2 Inch Stem | CC03F2

$6.49 - $11.99
Usually ships within one to two business days
Adding to cart… The item has been added

This front-facing instrument hanger extends 2 inches from the wall.  The adjustable padded cradle pivots to securely hold the instrument's headstock.

It is not recommended for use with acoustic guitars. See our CC03F4 to display acoustic guitars.

  • Made in the USA and backed by a lifetime structural warranty
  • Mounting Hardware Included (flat wall installation)
  • Slatwall Clip included (slatwall installation)
    • This clip prevents the hanger from lifting off of your slatwall when the instrument is removed

Installation Instructions:

Flat Wall: Choose location for hanger.  Drive screws through mounting holes of hanger into wall using a phillips screwdriver.  If a wall stud is not found, these pilot holes are necessary for installing the plastic toggles.  To do this, use the screwdriver to push and turn the toggle clockwise until flush.  Remount hanger with screw into toggles.  DO NOT REUSE TOGGLES.

Slatwall: Hook the clip into your slatwall system, just to the left of the hanger.  Then, gently pull the lip open on the right edge of the clip, and slide it over the hanger plate. Make sure that the lip has locked in place securely around the right edge of the plate. (This clip allows for movement of the plate, without allowing it to lift off your slatwall when the instrument is removed.)


Lifetime Structural Warranty