The CC01K guitar hanger has a deep cradle design known as the “Guitar Keeper”. This modified cradle prevents the guitar from being improperly placed into the hanger. This ultimately provides a safer hanger for your instrument. The guitar needs to be lifted 2 inches and brought forward to be removed.
The new “Guitar Keeper” design is great for guitars with single or uneven heels. Non-symmetrical bass, electric, and acoustic guitar headstocks are cradled perfectly while still hanging straight.
We simply added a “K” (for Keeper) to the original product code to distinguish between the original CC01 and CC01K.
The “Guitar Keeper” cradle is attached to a wall mount of North American hardwood, handcrafted by local Amish craftsmen. There are four species of hardwood available (Cherry, Oak, Ash and Black Walnut). Natural wood color may vary.
The “Guitar Keeper” yoke may be too narrow for some classical and bass guitars, in which case, we would recommend purchasing the original CC01. We recommend measuring the width of your guitar neck to choose the appropriate yoke.
This hanger is not best suited for classical guitars but our original style CC01 is made just for classicals! Check out the CC01 here!
- Trusted by over 10 million guitars around the world
- Made in the USA
- Backed with a lifetime structual warranty
- Mounting hardware included
Questions about nitrocellulose? See our statement here.
Flat Wall: Choose location on the wall for hanger. Press screws through mounting holes of hanger into wall using a phillips screwdriver. If a wall stud is not found, these pilot holes are necessary for installing the drywall anchors. To do this, use the screwdriver to push and turn the toggle clockwise until flush. Remount hanger with screw into anchors. DO NOT REUSE ANCHORS. The weight limit for use of this hanger is 15lbs or less.
Insert the cradle into the threaded hole of the block. Turn it clockwise until snug, and the cradle arms point upward. The cradle width can be adjusted to fit your instrument.