Our Wall Mount Piccolo Stand is great for school band and music rooms! This vertical hanger makes it possible to store your piccolo, while keeping it assembled and ready to play. Made from cold-rolled steel and a composite cushioning to protect your instrument. Give every instrument a place on your wall with a piccolo hanger from String Swing.
- Available in slatwall and flatwall mounting options
- Mounting hardware included (flatwall)
- Slatwall clip included
Made in the USA, and backed by a lifetime structural warranty.
Specifications:
Installation Instructions:
Flat Wall: Choose location for hanger. Drive screws through mounting holes of hanger into wall using a phillips screwdriver. If a wall stud is not found, these pilot holes are necessary for installing the plastic toggles. To do this, use the screwdriver to push and turn the toggle clockwise until flush. Remount hanger with screw into toggles. DO NOT REUSE TOGGLES.
Slatwall: Hook the clip into your slatwall system, just to the left of the hanger. Then, gently pull the lip open on the right edge of the clip, and slide it over the hanger plate. Make sure that the lip has locked in place securely around the right edge of the plate. (This clip allows for movement of the plate, without allowing it to lift off your slatwall when the instrument is removed.)
