The Upright Bass Neck Support was created to help stabilize floor bass displays. As your string instrument rests on the floor, simply tilt it back, until the bass’ neck rests in the unit’s cradle.
This support is not meant to bear the weight of the instrument. Instead, use the adjustable pin/post leg at the bottom of your instrument while using this display.
Made in the USA, and backed by a lifetime structural warranty.
Specifications:
Padded Cradle Width:
2 1/4" at the narrower part and 2 3/4" at the wider part (near black caps)
Installation Instructions:
Slatwall: Hook the clip into your slatwall system, just to the left of the hanger. Then, gently pull the lip open on the right edge of the clip, and slide it over the hanger plate. Make sure that the lip has locked in place securely around the right edge of the plate. (This clip allows for movement of the plate, without allowing it to lift off your slatwall when the instrument is removed.)
